Posted by:  Xiaoping Yuan, Forest Analysis and Inventory Branch, MFLNRO
Rational:  Basic data required for RFP/ITT/ITQ tenders for WL and PG TSA's 
Post Date: April 2, 2012
Delete Date:  TBD


Content:

1.  flight_planning_data.zip


For the Williams Lake project area:

- contour_200m_WL : Contour map, 200m interval
- flight_strips_WL : proposed flight strips with end points, TBD flight direction, the strips must be 
			extended 200m beyond the project area
- plots_on_strips_WL : NFI photo plot centers, these must be flown at 10cm or better, 
			minimum width: 1000m
- project_area_WL: The project area 
- flight_plan_WL.pdf: Flight overview map 


For the Prince George project area:

- contour_200m_PG: Contour map, 200m interval
- flight_strips_PG:  Proposed flight strips with end points, TBD flight direction, the strips must be 
			extended 200m beyond the project area
- plots_on_strips_PG: NFI photo plot centers, these must be flown at 25 cm or better, 
		minimum width: 2300m, the georeference accuracy within +/- 1m for plot center
- project_area_PG: The project area 
- flight_plan_PG.pdf: Flight overview map


2.  VRI2012.zip

- VRI_photo_plots_WL_PG: VRI inventory data 2012 for the NFI photo plots in the Williams Lake and 
			Prince George areas


3.  Landsat_mosaic.zip

- l5_bc_2006_bcalb_120m_b543.tif: Landsat 5 image mosaic, 120m x 120m, color enhanced bands 543 RGB, 2006.

4. Trim DEM (Available on request)

5. Photo_int_polygons.zip
- NFI_photo_PG_2009.shp:    NFI photo plots with forest cover done in 2009 in the Prince George area
- NFI_photo_plot.pdf:  Sample map of one NFI photo plot, 2km x 2km
- segmentsonstrip_WL.pdf:  Sample map of segments on the flight strips.